|
Once an infrastructure is active, you have access to the DNS mask and IP addresses. You can view the mask and addresses by accessing the configuration screens. |
The following table shows the IP addresses viewable from each element's configuration dialog:
|
Element |
Address |
|
Server/tier |
view IP addresses for the incoming and outgoing port for each server configured |
|
Firewall |
view IP addresses for the outside, inside and DMZ interfaces. Also view the DNS and network address translation (NAT) mapping for the interface |
|
Load balancer |
view IP addresses for the virtual IP (incoming interface). Also view the virtual and real IP addresses for the load-balancing group |
|
Subnet |
view the subnet IP address and mask, and the IP address for Network Attached Storage (NAS) |
|
Backhaul circuit |
view the IP address for the backhaul circuit |